Welcome to the Guangdong STON testing technology co., LTD. The official website!
                    Japan certification
                    We focus lighting, and lighting fittings, mainly to drive the inspection certification services.
                    Japan certification

                     Wireless products exported to Japan JATE certification and MIC certification

                    While the earth rotates a circle or a day, the sun, the moon or a fall from east to west each day together, the years of the same routine does not stop the bluetooth and WIFI products will become the latest must-haves in the wireless communication field, they become more popular used in products in people's lives, such as bluetooth apparel (figure 1), smart home products (figure 2), they are more and more common, making these products account for a market share of more and more big, then the problem: When some wireless communication products suddenly burst out, each country is bound to strengthen the supervision of imported products, to ensure the standardization of the entire sales market. Today Xiaobian is popular in Japan JATE certification and MIC certification.
                    JATE certificate
                    Japan's Ministry of Public Administration and Internal Affairs, Post Office and Telecommunications (MPHPT) has stipulated in the Japan Telecom Communications Commercial Law that Japan's telecommunications equipment is subject to compulsory certification. The Telecommunications Commercial Statute was introduced in 1985 and under section 68, MPHPT authorises qualifying agencies to carry out accreditation of technical conditions. JATE is authorised by MPHPT to be the only qualified agency to implement qualified accreditation of the technical environment, known as JATE accreditation. JATE enforces mandatory certification of telecommunications equipment on public networks. Approved devices can be connected to public networks without being checked by telecom providers. Generally, the manufacturer applies for the compliance certification of class A technical conditions, and the test certification is only valid for the test samples.
                    MIC certification:
                    A, Test Certification is the Certification of each equipment unit. The Test Certification is only valid for each equipment unit that has been certified.
                    B, Type Certification is the Certification of a batch of equipment samples that have been designed and manufactured in the same way. The Certification is valid for all of the equipment. However, if the design or manufacture of the equipment has been changed, the equipment will need to be re-certified.
                    General manufacturers apply for B type certification, A type test certification is only valid for the test sample.
                    Reference items for MIC testing are as follows:
                    Frequency Error Measurement
                    Occupied Bandwidth and Broadband Occupied Bandwidth and Broadband Measurement
                    The stray Emission Intensity Measurement of the Unwanted Emission Intensity
                    ... For more information, please contact CTL-LAB staff
                    The reference items for JATE testing are as follows:
                    Identification Code detection, Identification Code, etc
                    ... For more information, please contact CTL-LAB staff
                    It is worth noting that the use of non-low power radio stations and their terminal equipment needs to apply for a license from MIC.
                    In addition, the compliance certification of telecommunications terminal equipment is divided into two situations:
                    A, for ordinary telephone devices, as long as JATE certification as required by the Telecommunications Act;
                    B. For wireless terminal equipment, in addition to JATE certification as required by the Telecommunications Act, MIC certification shall also be conducted as required by the Radio Act.
                    Blackstone laboratory (CTL - LAB), the professional team of RF wireless technology wireless certification and testing requirements for the continuous in-depth study, and the wireless certification and testing in many countries there are quite a few cases and experience, can help our customers improve the performance of its products, in the design considering the restrictions certification requirements. At the same time, it can also help customers to shorten the certification and testing process, so that customers' products can be exported to foreign countries quickly, especially the local market in Japan. If there is a demand for JATE certification and MIC certification of wireless products exported to Japan, welcome to inquire.


                    Introduction to PSE Certification
                    PSE certification is a mandatory safety certification in Japan, used to prove that the electrical and electronic products have passed the safety standard tests of the Denan Law of Japan or the international IEC standards. Japan's Dentorl Law stipulates that 498 products must pass safety certification to enter the Japanese market. Among them, 165 A products should get the rhomboid PSE logo, 333 B products should get the round PSE logo.
                    Introduction to the
                    PSE certification is a mandatory safety certification in Japan, used to prove that the electrical and electronic products have passed the safety standard tests of the Denan Law of Japan or the international IEC standards. Japan's Dentorl Law stipulates that 498 products must pass safety certification to enter the Japanese market. Among them, 165 A products should get the rhomboid PSE logo, 333 B products should get
                    Get the round PSE logo.
                    Since 1 April 2001, the Electrical Product Control Act (DENTORL) has been officially renamed the Electrical Product Safety Act (DENAN). In contrast to the previous regulatory system of agreed controls, the new system will leave it to an unofficial body to ensure product safety.
                    Authentication way
                    The way for Chinese enterprises to obtain PSE certification from Japan
                    With the accession of more and more countries to the WTO, in order to meet the international standards, many countries formulate laws and regulations on the safety of all kinds of goods, energy saving, environmental protection and other technical indicators to limit, which can not only ensure the domestic industry and market level, but also form a certain technical barriers.
                    Japan is a country with complex safety regulation system. Foreign products want to enter the Japanese market, will face a high threshold.
                    Electrical Supplies Safety Act (DENAN) requirements
                    Buyers in Japan must register their purchases with the Ministry of Economy, Trade and Industry (METI) within one month of the purchase. All electrical and electronic products in the DENAN catalog for sale in the Japanese market must be PSE certified. Japan Denan classifies electrical and electronic products into two categories: Specified Products, including 115 products; Non-specified Products, including 338 products. Specific electrical products must be inspected by a third-party certification body authorized by the Ministry of Economy, Trade and Industry of Japan for products and factory test equipment, and PSE certification certificate shall be issued. The validity period of the certification shall be 3 to 7 years, and PSE diamond logo shall be pasted on the products. For non-specific electrical products, the compliance of the products shall be proved through self-inspection and declaration, and the PSE circular logo shall be affixed on the products.
                    Conform to DENAN's approach and requirements
                    According to DENAN requirements, products certified by PSE must meet the requirements of the relevant safety technical benchmarks. There are two kinds of Japanese electrical product safety technical benchmarks:
                    (1) Japan Technical Standard 1 refers to the domestic technical standard in Japan, which is quite different from the technical requirements of IEC standard and is an independent system.
                    (2) Japan Technical Standard 2, issued by the Japanese government in 2002, is consistent with the relevant IEC standards, but not all electrical products have the corresponding Technical Standard 2 standard.
                    The manufacturer can choose to carry out the suitability check according to the technical benchmark 1 or 2. After passing the test, the PSE logo can be added. In general, technical benchmark 1 and benchmark 2 should not be mixed.
                    Applicants for PSE certification can be manufacturers or importers.
                    Denan also requires that the buyer's name or ID be marked on the product so that it can be monitored during the sale of the product.
                    For the products imported to Japan, the safety responsibility is borne by the Japanese importer. Therefore, the importer must keep the inspection report and inspection record, and the inspection record can also be viewed through the computer network.
                    How do Chinese manufacturers get PSE certification
                    The first step for the Chinese manufacturer is to determine whether the product they are applying for falls within the scope of certification that the China Quality Certification Center (CQC) has been authorized to accept. Since the authorization obtained by CQC is based on Technical Benchmark 2 at present, manufacturers must choose Technical Benchmark 2 to apply for PSE certification. After confirmation, the manufacturer can submit a written application to CQC, and submit samples and technical data to PSE certification laboratory for type test. Since both China and Japan are member countries of IECEE-CB system, the test report can also be directly converted from CB report. Upon completion of the inspection report, the applicant shall provide the operation manual or assembly manual in Japanese, the relevant structure and parts information of the product, the relevant information of the testing equipment, the factory quality inspection report (including 100% electrical strength test report of the production line, operation inspection record, etc.) and accept the factory inspection arranged by CQC. After passing the factory inspection, you can obtain the PSE certification certificate.
                    Japan PSE Compulsory Products PSE Certification Agency
                    Japanese agencies Jet and JQA. Outside Japan, TUV Rhein, TUV SUD, CQC in China and UL in the United States
                    Japan PSE voluntary products PSE certification body
                    Japan JQA,JET,MET. Other institutions outside Japan TUV Rhein,TUV Suander, NPS, UL,CQC, Taiwan ETC.

                    The METI, Ministry of Economy, Trade and Industry published details of the methodology, which was developed by the Information Economy Division of the Ministry's Commerce and Information Policy Bureau.
                    Meti refers to the process as a method for evaluating various use case projects, evaluating 32 essential characteristics such as scalability, privacy and overall reliability, according to the report, "Japanese Government Formulates Blockchain Project Assessment Method." People involved in developing the methodology say the aim is to objectively measure blockchain projects
                    1. Notification of business, including manufacturer information, product information and date of signing
                    2. The approval certificate issued by the Ministry of Economy, Trade and Industry of Japan. The importer can only issue this approval certificate with the PSE deputy certificate to METI for filing
                    Guangdong Stone Testing Technology Co., Ltd. is located in the lighting product base in South China -- Henglan Town, Zhongshan City. It is an independent third-party testing laboratory which is organized and established in strict accordance with the international laboratory management standards. We specialize in lighting and drive
                    Inspection and certification of main lighting accessory parts.


                    中文字幕日韩精品,欧美一级A片在线观看,日韩加勒比一本无码精品,免费乱理伦片在线观看中文,欧美特大黄一级AA片免费看